院長 奥 謙太郎|2024年6月27日の記録(2026年10月23日に加筆・再構成)
この記事の要点
2024年6月、ヒルズグレイスクリニック内に設立した当院の教育機関GMIで、第2回グローバルセミナーを開催しました。第1回からわずか2週間後、インドネシア、フィリピン、マレーシアの医師をお迎えし、シミ治療へのピコシュアプロとピコシュアの応用、ポテンツァ(国内未承認の医療機器)の毛穴・肌質へのアプローチをテーマにしました。レーザーとニードルRFは異なるエネルギーを使うため、同じ考え方では効果的な治療を組み立てられません。そこで両者の違いと、それがどこから生じるのかを詳しく解説しました。患者様にとっては、医師が学ぶ場で何が共有されているのかを知る手がかりになります。

はじめに
第1回のトレーニングからわずか2週間後、GMIでは第2回のトレーニングセッションを開催しました。この回は、医療機器を使いこなすのに大切なことは何か、という参加者への問いかけから始まりました。
1. 第1回から2週間 ― 3か国の医師を迎えて
インドネシア、フィリピン、マレーシアから医師の皆様をお迎えし、第2回のトレーニングセッションを開催しました。会場は、横浜あざみ野のヒルズグレイスクリニック内にあるGMIです。
今回取り上げたテーマは、次の2つです。
- シミ治療に対する、ピコシュアプロ(PICOSURE pro)とピコシュア(PicoSure)の効果的な応用方法
- 毛穴や肌質改善のための、ポテンツァ(国内未承認の医療機器)の応用法

2. 冒頭の問いかけと、その答え
レーザーなどの医療機器を意のままに使いこなすのに大切なことは何か。この問いかけに対して、多く返ってきたのは「機器の設定」や「適切な機器の選択」といった答えでした。
GMIのトレーニングを経ると、この回答は大きく変わっていきます。GMIは、治療の背景にある原理の理解を重んじています。

3. レーザーとニードルRFの違いを解説
今回は、レーザーとニードルRF(針を用いて高周波を流す治療)の違いを詳しく解説しました。両者は異なるエネルギーを使うため、同じ考え方では効果的な治療を組み立てることができません。そこで、両者の違いを明らかにし、それがどこから生じるのかを掘り下げました。
背景として補足すると、ニードルRFでは、どの層まで針を進め、どのような性質の高周波を使うかを慎重に決める必要があります。これは、のちの第5回でも取り上げた観点です。
また、ピコシュアとピコシュアプロについては、のちの第4回で、両者の違いを次のように整理しました。ピコシュアが自動設定を多用し、簡便さを重視していたのに対し、ピコシュアプロは術者がレーザーの強さや深さ、広がりなどを自ら設定する必要がある、という点です。
4. 聞くだけで終わらせない、双方向のセッション
GMIでは、参加者が積極的に考え、発言し、意見を交わすインタラクティブなセッションを重視しています。一方的に聞くだけではなく、双方向の対話を通じて深い理解を得られるよう設計しています。
座学でも実践でも、質問や意見が自由に飛び交う環境を整えること。そして、得た知識や技術を日々の診療ですぐに活かせるようサポートすること。これがGMIの大きな特徴です。
セッションを通じて、医師一人ひとりが自信を持って実践できる技術を身につけることを目指しています。機器ごとの違いを理解したうえで治療を組み立てるという考え方は、横浜あざみ野での日々の診療で私が大切にしている考え方と同じです。
よくある質問
レーザーとニードルRFは何が違うのですか?
どちらも肌に働きかける機器ですが、使うエネルギーが異なります。そのため、同じ考え方では効果的な治療を組み立てることができません。第2回のGMIでは、両者の違いと、それがどこから生じるのかを医師向けに解説しました。どちらが適しているかは肌の状態によって異なり、効果には個人差があります。
ピコシュアプロとピコシュアの違いは何ですか?
どちらもピコ秒(1兆分の1秒)レーザーです。のちの第4回のGMIで整理したように、ピコシュアが自動設定を多用して簡便さを重視していたのに対し、ピコシュアプロは術者がレーザーの強さ、深さ、広がりなどを自ら設定する必要があります。そのぶん、機器の理論を理解したうえで使うことが大切になります。効果や経過には個人差があり、詳しくは公式サイトをご確認ください。
ポテンツァは、毛穴や肌質の悩みにどのように使われる機器ですか?
ポテンツァは、針を用いて高周波を流すマイクロニードルRFの機器で、国内未承認の医療機器です。第2回のGMIでは、毛穴や肌質改善のための応用法を医師向けに取り上げました。効果の出方には個人差があります。適応やリスクについては、診察時に医師へご相談ください。
おわりに
第2回のGMIは、ひとつの問いかけから始まり、レーザーとニードルRFの違いがどこから生じるのかを解説する1日になりました。その後、9月には第3回のセッションを開催しました。
シミ・たるみ・肌質のお悩みは、横浜あざみ野のヒルズグレイスクリニックまでご相談ください。診察のうえで、一人ひとりに合った治療の組み立てをご提案します。カウンセリングのご予約はこちら →
Director Kentaro Oku | Record of 27 June 2024 (expanded and restructured on 23 October 2026)
Key points
In June 2024, we held the 2nd Global Seminar at GMI, our clinic’s educational institution established within Hills Grace Clinic. Just two weeks after the first seminar, we welcomed doctors from Indonesia, the Philippines and Malaysia. The themes were the application of PicoSure Pro and PicoSure to pigmentation treatment, and the approach to pores and skin quality with Potenza (a medical device not approved in Japan). Because lasers and needle RF use different types of energy, effective treatment cannot be designed with the same way of thinking. We therefore explained in detail the differences between the two and where those differences come from. For patients, this offers a clue to what is shared in the places where doctors learn.

Introduction
Just two weeks after the first training session, GMI held its second training session. This session began with a question to the participants: what matters most in mastering medical devices?
1. Two weeks after the first session: welcoming doctors from three countries
We welcomed doctors from Indonesia, the Philippines and Malaysia and held the second training session. The venue was GMI, located within Hills Grace Clinic in Azamino, Yokohama.
The themes covered this time were the following two.
- Effective application of PicoSure Pro (PICOSURE pro) and PicoSure to pigmentation treatment
- Application of Potenza (a medical device not approved in Japan) for pores and skin-quality improvement

2. The opening question, and its answer
What matters most in mastering medical devices such as lasers at will? Many of the answers to this question were along the lines of “device settings” or “choosing the right device”.
After GMI training, these answers change considerably. GMI places great importance on understanding the principles behind treatment.

3. Explaining the differences between lasers and needle RF
This time, we explained in detail the differences between lasers and needle RF (a treatment that delivers radiofrequency energy through needles). Because the two use different types of energy, effective treatment cannot be designed with the same way of thinking. We therefore clarified the differences between the two and explored where they come from.
As background, with needle RF it is necessary to decide carefully which layer the needles are advanced to and what kind of radiofrequency energy is used. This is a perspective that was also taken up later, at the 5th session.
Regarding PicoSure and PicoSure Pro, at the later 4th session we summarised the difference between them as follows: whereas PicoSure made extensive use of automatic settings and prioritised ease of use, PicoSure Pro requires the operator to set the laser’s intensity, depth, spread and so on themselves.
4. Interactive sessions that go beyond listening
At GMI, we place importance on interactive sessions in which participants actively think, speak up and exchange views. Rather than simply listening one way, the sessions are designed so that participants gain a deep understanding through two-way dialogue.
Creating an environment where questions and opinions flow freely, in both lectures and practical work, and supporting participants so that they can put the knowledge and skills they gain to use straight away in their daily practice: these are the defining features of GMI.
Through the sessions, we aim for each doctor to acquire skills they can practise with confidence. The approach of designing treatment after understanding the differences between devices is the same approach I value in my daily practice in Azamino, Yokohama.
Frequently asked questions
What is the difference between lasers and needle RF?
Both are devices that act on the skin, but they use different types of energy. For this reason, effective treatment cannot be designed with the same way of thinking. At the 2nd GMI session, we explained to doctors the differences between the two and where those differences come from. Which is more suitable depends on the condition of the skin, and results vary between individuals.
What is the difference between PicoSure Pro and PicoSure?
Both are picosecond (one trillionth of a second) lasers. As summarised later at the 4th GMI session, whereas PicoSure made extensive use of automatic settings and prioritised ease of use, PicoSure Pro requires the operator to set the laser’s intensity, depth, spread and so on themselves. For that reason, it is all the more important to use PicoSure Pro with an understanding of the device’s theory. Results and progress vary between individuals; for details, please check the official website.
How is Potenza used for concerns about pores and skin quality?
Potenza is a microneedle RF device that delivers radiofrequency energy through needles, and it is a medical device not approved in Japan. At the 2nd GMI session, we covered its application for pores and skin-quality improvement for doctors. How results appear varies between individuals. Please consult a doctor at your examination about suitability and risks.
In closing
The 2nd GMI session began with a single question and became a day of explaining where the differences between lasers and needle RF come from. Afterwards, in September, we held the 3rd session.
For concerns about pigmentation, sagging or skin quality, please consult Hills Grace Clinic in Azamino, Yokohama. After an examination, we will propose a treatment plan suited to each individual. Book a consultation →







